To be able to apply a remote update, the BrightSign device must be connected and accessible to the BrightAuthor:connected Software during the process.   Creating a new Player Setup Open the software BrightAuthor:connected, go to the "Admin" page and click on "Setup" option. Create a new "Player Setup", define a "Setup Name" and a "Player Name", then...

THIS METHOD IS NOT RECOMMENDED.   While this is an easy and convenient installation method, this setup does not allow to configure the Players' network and timezone settings. Installation steps: Download the file: https://brightsign.onsign.tv/autorun.zip. Copy the ZIP file into the root folder of an empty FAT32 SD Card. Put the SD card into a Bright...

BSN.cloud is a free service provided by BrightSign to help with deployment and remote Player management. This is the preferred installation method for BrightSign Players.   Using the BSN.cloud in combination with OnSign TV you can: Install the OnSign TV  Player App on BrightSign devices remotely. Remotely update the BrightSign Player Firmware. Get r...

There are two ways to set the IP as static on BSN.cloud. During the profile creation on BSN.cloud, there is an option for the network configuration: If the player however is already created, select the player from the list (1) and then expand the Network Settings menu (2). The expanded Network Settings look as follows: If the settings are disabled, ...

Wifi will only be available if you use a supported BrightSign Wifi module. More info at https://www.brightsign.biz/brightsign-players/accessories/#wifi-modules If you have the Wifi module installed and this option chosen, you'll be asked for the network SSID and password. Go to Start > Network Setup > Setup WiFi Here, select "Advanced" to conf...

A good practice is to factory reset your Player before deploying it to the field. This will ensure you get a clean install. Follow these steps to factory reset your BrightSign device: Power off the Player. Remove the SD card and format it (FAT32). Insert the SD card again while the device is still turned off. Hold the SVC and Reset buttons. Connect ...

How to install an SPM (Signage Platform Module) to allow remote commands on Sony Bravia devices. With this SPM you can remotely update your player app, as well as remotely reboot the device. Remote view, however is not supported on Sony Bravia with this SPM. Copy the .pkg file to a USB flash drive and insert the drive into the display. Download the ...

Requirements: Use a USB stick or an empty FAT32 or ExFAT SD Card. If the storage device is not empty, the installation process will not work! Make sure the Player's ethernet cable is connected so that the Player can obtain an IP address. You will need a computer connected to the same network as the Player to access the BrightSign Player web interfac...

OnSign TV can be installed on the following BrightSign Players:    BrightSign Series 3 (LS3, HD3, XD3, XT3)   BrightSign Series 4 (LS4, HD4, XD4, XT4)   BrightSign Series 5 There are three methods to install the OnSign TV  Player App on BrightSign. Through BSN.Cloud (preferred) - This option allows remote installation and additional remote Player se...