BrightSign

Home
- Home
Tutorials

Back to Main Site

Home Tutorials Players Player Installation BrightSign

Sort By

Newest
Most likes
Most views

Installing BrightSign Player Software

BrightSign Factory Reset

A good practice is to factory reset your Player before deploying it to the field. This will ensure you get a clean install. Follow these steps to factory reset your BrightSign device: Power off the...

January 3rd, 2026 1231 views 0 likes
BrightSign Static IP

There are two ways to set the IP as static on BSN.cloud. During the profile creation on BSN.cloud, there is an option for the network configuration: If the player however is already created, select the...

January 3rd, 2026 665 views 0 likes
BrightSign Wifi Network Setup

Wifi will only be available if you use a supported BrightSign Wifi module. More info at https://www.brightsign.biz/brightsign-players/accessories/#wifi-modules If you have the Wifi module installed and this option chosen, you'll be asked for the network SSID...

January 3rd, 2026 866 views 0 likes
Migrating from BSN to OnSign TV

To be able to apply a remote update, the BrightSign device must be connected and accessible to the BrightAuthor:connected Software during the process. Creating a new Player Setup Open the software BrightAuthor:connected, go to...

January 3rd, 2026 628 views 0 likes
Supported video formats for BrightSign Players

The following information was copied from BrightSign Docs. To play video successfully on BrightSign Players, see the following requirements. Bitrate information for older Players can be found here. To reformat and reencode videos we...

August 28th, 2025 7113 views 0 likes
Installing Quividi VidiReports on BrightSign Players

This tutorial has been created to conveniently help OnSign users install the Quividi software on BrightSign players. As Quividi is an independent company, we encourage users to regularly check Quividi official tutorials for the latest...

February 2nd, 2026 386 views 0 likes
Using Nexmosphere and BrightSign

In this tutorial we demonstrate how we can apply interactivity using Nexmosphere devices attached to a BrightSign device. Watch this demo video. Requirements for this setup OnSign Player installed on a BrightSign computer (tutorial). When using...

March 11th, 2026 3693 views 0 likes
Connecting USB GPS to BrightSign Player

This article explains how to connect a USB GPS device to a BrightSign player, enabling location-based content and more precise targeting for your OnSign deployments. Make sure the USB GPS device is connected before powering...

May 5th, 2026 119 views 0 likes
Aligning the screen

If your Video Wall setup is using screens with some border or spaced out, the content shown in your screens will not be completely aligned without adjustments. In this example we demonstrate how to calculate...

March 12th, 2025 1394 views 0 likes